Plug in the old module again then follow process below – Issue the ‘no module x’ command, where x is the letter of the slot (A through L).The following warning will be displayed:This command will shut down the specified modules and remove all configuration settings for those modules and their ports. Any management traffic for Read more about Orange flashing light after changing module on 5400R zl2[…]
vlan 1 name “DEFAULT_VLAN” ip address 10.1.1.3 255.255.255.0 dhcp-server exit dhcp-server pool “Lab” authoritative default-router “10.1.1.1” dns-server “10.1.1.97,10.1.1.1” domain-name “domain.com” network 10.1.1.0 255.255.255.0 range 10.1.1.200 10.1.1.254 exit dhcp-server enable
The delete file command moves a file to the recycle bin. To restore the file, use the undelete command. If you delete two files with the same file name in different directories, only the last one is retained in the recycle bin. The dir /all command displays the files moved to the recycle bin. These files are Read more about Permanently Delete Files On HP Switches[…]
A list of basic commands for HP switches. Notes: <> indicates a changeable variable, such as port number or VLAN ID. [] indicates an optional string or value. <port> value can be either a single port (A1), multiple ports (A1,B3), or a port string (A1-B10). | signifies interchangeable (or) values. Config Files and Flash Files Read more about HP Procurve CLI Cheat Sheet[…]
First up if you dont already download a free TFTP Server – recommend this one http://www.solarwinds.com/products/freetools/free_tftp_server.aspx Install and note IP address of machine installed on. For example here its 10.1.1.10 Log on to your switch… First, we will take a look at what version of firmware the switch shipped with (and already exists, therefore, on flash): Read more about Update HP Procurve Firmware[…]